Defining Snmp Notification Filters; Figure 3-40. Trap Filter Settings Page - Alcatel OmniStack LS 6248 User Manual

3
Configuring the Switch

Defining SNMP Notification Filters

The Trap Filter Settings Page permits filtering traps based on OIDs. Each OID is
linked to a device feature or a portion of a feature. The Trap Filter Settings Page also
allows network managers to filter notifications.
Command Attributes
• Filter Name — Contains a list of user-defined notification filters.
• Object ID Subtree — Displays the OID for which notifications are sent or blocked.
If a filter is attached to an OID, traps or informs are generated and sent to the trap
recipients. OIDs are selected from either the Select from field or the Object ID field.
• Filter Type — Indicates whether to send traps or informs relating to the selected
OID.
• Excluded — Does not send traps or informs.
• Included — Sends traps or informs.
• Remove — Deletes filters.
• Checked — Deletes the selected filter.
• Unchecked — Maintains the list of filters.
Web – Click System, SNMP, Trap Management, Trap Filter Settings. Define the
fields and click Apply.
CLI – The following is an example of the Trap Management CLI commands:
Console(config)# snmp-server filter filter-name system included
Console(config)# snmp-server filter filter-name system.7 excluded
Console(config)# snmp-server filter filter-name ifEntry.*.1 included
4-360
100

Figure 3-40. Trap Filter Settings Page