Onkyo SR705 - TX AV Receiver Instruction Manual page 93

TX-SR705_En.book Page 93 Monday, May 28, 2007 2:13 PM
Advanced Setup—Continued
OSD Setup
1
Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu appears onscreen.
2
Use the Up and Down [
buttons to select
"6. Miscellaneous," and then
press [ENTER].
ENTER
The Miscellaneous menu appears.
6. Miscellaneous
1. Volume Setup
2. OSD Setup
ENTER
3
Use the Up and Down [
buttons to select "2. OSD Setup,"
and then press [ENTER].
The OSD Setup menu appears.
ENTER
6–2. OSD Setup
Immediate Display
Monitor Type
Display Position
TV Format
ENTER
4
ENTER
ENTER
]/[ ]
]/[ ]
On
4 : 3
Bottom
Auto
5
Note:
This procedure can also be performed on the AV
receiver/AV amplifier by using its [SETUP] button,
arrow buttons, and [ENTER] button.
Use the Up and Down [ ]/[
buttons to select the settings,
and use the Left and Right [
[ ] buttons to set them.
These settings determine how the oper-
ation details are displayed.
Immediate Display
This preference determines whether
operation details are displayed
onscreen when an AV receiver/AV
amplifier function is adjusted.
On: Displayed (default).
Off: Not displayed.
Even when On is selected, operation
details may not be output if the input
source is connected to a COMPO-
NENT VIDEO IN or HDMI IN.
For optimal video performance, THX
recommends that Immediate Display
be turned off.
Monitor Type
With this preference, you can specify
the aspect ratio of your TV so that the
operation details are displayed prop-
erly.
4 : 3: Select if your TV is 4 : 3
(default).
16 : 9: Select if your TV is 16 : 9.
Display Position
This preference determines where on
the screen operation details are dis-
played.
Bottom: Bottom of the screen
(default).
Top: Top of the screen.
TV Format (not North American
models)
See "TV Format Setup (not North
American models)" on page 52.
When you've finished, press the
[SETUP] button.
The setup menu closes.
]
]/
93