Onkyo SR705 - TX AV Receiver Instruction Manual page 80

TX-SR705_En.book Page 80 Monday, May 28, 2007 2:13 PM
Advanced Setup—Continued
Speaker Distance
This setting is set automatically by the Automatic
Speaker Setup function (see page 54).
Here you can specify the distance from each speaker to
the listening position so that the sound from each
speaker arrives at the listener's ears as the sound
designer intended.
2, 3
1, 7
1
Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu appears onscreen.
2
Use the Up and Down [
buttons to select "2. Speaker
Setup," and then press [ENTER].
The Speaker Setup menu appears.
ENTER
2. Speaker Setup
1. Speaker Settings
2. Speaker Config
3. Speaker Distance
4. Level Calibration
5. Equalizer Settings
6. THX Audio Setup
ENTER
3
Use the Up and Down [
buttons to select "3. Speaker Dis-
tance," and then press [ENTER].
The Speaker Distance menu appears.
ENTER
2–3. Speaker Distance
Unit
Left
Center
Right
Surr Right
Surr Back R
ENTER Surr Back L
Surr Left
Subwoofer
80
4
1
2-6
5
]/[ ]
6
7
Notes:
• The Center and Subwoofer distances can be set up to
5 ft. (1.5 m) more or less than the Front distance. For
]/[ ]
example, if the Front distance is set to 20 ft. (6 m), the
Center and Subwoofer distances can be set between 15
and 25 ft. (4.5 and 7.5 m). The Surr Right, Surr Left,
Surr Back R, and Surr Back L distances can be set up
to 5 ft. (1.5 m) more or 15 ft. (4.5 m) less than the
feet
Front distance. For example, if the Front distance is set
12.0ft
12.0ft
to 20 ft. (6 m), the Surr Right, Surr Left, Surr Back R,
12.0ft
7.0ft and Surr Back L distances can be set between 5 and
7.0ft
25 ft. (1.5 and 7.5 m).
7.0ft
7.0ft
• This procedure can also be performed on the AV
12.0ft
receiver/AV amplifier by using its [SETUP] button,
arrow buttons, and [ENTER] button.
Note:
Speakers that you set to No or None on
the Speaker Configuration page
(page 77) cannot be selected.
Use the Up and Down [
buttons to select "Unit," and then
use the Left and Right [
buttons to select:
ENTER
feet: Select if you want to enter dis-
tances in feet. Can be set from
0.5 to 30 feet in 0.5-feet steps.
meters: Select if you want to enter
distances in meters. Can be
set from 0.15 to 9 meters in
ENTER
0.15-meter steps.
Use the Up and Down [
buttons to select "Left," and then
use the Left and Right [
ENTER
buttons to specify the distance.
Specify the distance from the front left
speaker to your listening position.
ENTER
Repeat step 5 for all speakers.
Press the [SETUP] button.
The setup menu closes.
]/[ ]
]/[ ]
]/[ ]
]/[ ]