Onkyo SR705 - TX AV Receiver Instruction Manual page 49

TX-SR705_En.book Page 49 Monday, May 28, 2007 2:13 PM
First Time Setup—Continued
Component Video Setup
If you connect to a COMPONENT VIDEO IN, you must
assign it to an input selector. For example, if you connect
your DVD player to COMPONENT IN 3, you should
assign it to the DVD input selector.
If you want to output composite and S-Video sources
from the COMPONENT VIDEO OUT, select "---," as
explained below.
Input selector
DVD
VCR/DVR
CBL/SAT
GAME/TV
AUX
If you've connected your TV to the AV receiver/AV
amplifier with a component video cable, you can set the
AV receiver/AV amplifier so that composite video and S-
Video sources are upconverted* and output by the COM-
PONENT VIDEO OUT.
You can set this for each input selector by selecting the
"- - -" option.
Composite video, S-Video
OUT
Composite video, S-Video
1
Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu appears onscreen.
2
Use the Up and Down [
buttons to select "1. Input/Out-
put Assign," and then press
[ENTER].
ENTER
The Input/Output Assign menu
appears.
1. Input/Output Assign
1. Monitor Out
2. HDMI Input
3. Component Video Input
ENTER
4. Digital Input
VIDEO IN jack
IN 1
- - -
- - -
- - -
- - -
Component video
IN
Component video
]/[ ]
3
Use the Up and Down [
buttons to select "3. Component
Video Input," and then press
[ENTER].
ENTER
The Component Video Input menu
appears.
1–3. Component Video Input
DVD
VCR/DVR
ENTER
CBL/SAT
GAME/TV
AUX
4
Use the Up and Down [
buttons to select an input selec-
tor, and then use the Left and
Right [ ]/[
ENTER
IN 1: Use the video component
connected to COMPO-
NENT VIDEO IN 1.
IN 2: Use the video component
connected to COMPO-
NENT VIDEO IN 2.
ENTER
IN 3: Use the video component
connected to COMPO-
NENT VIDEO IN 3.
- - -: Output composite video
and S-Video sources from
the COMPONENT
VIDEO OUT.
5 Press the [SETUP] button.
The setup menu closes.
Notes:
• For composite video and S-Video upconversion for
the COMPONENT VIDEO OUT, the HDMI Monitor
setting must be set to No (see page 47), and the Com-
ponent Video Input setting must be set to "- - -". See
page 28 for more information on video signal flow and
upconversion.
• This procedure can also be performed on the AV
receiver/AV amplifier by using its [SETUP] button,
arrow buttons, and [ENTER] button.
]/[ ]
IN 1
– – –
– – –
– – –
– – –
]/[ ]
] buttons to select:
49