Onkyo SR705 - TX AV Receiver Instruction Manual page 28

TX-SR705_En.book Page 28 Monday, May 28, 2007 2:13 PM
Connecting the AV Receiver/AV Amplifier—Continued
■ HDMI Monitor Setting Set to No
With the HDMI Monitor setting set to No (see
page 47), video input signals flow through the
AV receiver/AV amplifier as shown, with com-
posite video and S-Video sources being upcon-
verted for the component video output. Use this
setting if you connect the AV receiver/AV ampli-
fier's COMPONENT VIDEO OUT to your TV.
Composite video is upconverted to S-Video and
S-Video is downconverted to composite video.
Note that these conversions only apply to the
MONITOR OUT V and S outputs, not the
VCR/DVR OUT V and S outputs.
The composite video, S-Video, and component
video outputs pass through their respective input
signals as they are.
Audio Connection Formats
Audio equipment can be connected to the AV
receiver/AV amplifier by using any of the follow-
ing audio connection formats: analog, optical,
coaxial, analog multichannel, or HDMI.
When choosing a connection format, bear in
mind that the AV receiver/AV amplifier does not
convert digital input signals for analog line out-
puts and vice versa. For example, audio signals
connected to an optical or coaxial digital input
are not output by the analog TAPE OUT.
28
DVD player, etc. Video Signal Flow Chart
Composite
AV receiver/
AV amplifier
Composite
TV, projector, etc.
DVD player, etc. Audio Signal Flow Chart
Analog Multichannel
AV receiver/
AV amplifier
Analog
MD recorder, etc.
S-Video Component HDMI
IN
MONITOR OUT
Component HDMI
S-Video
Optical Coaxial HDMI
IN
OUT
Optical HDMI