Onkyo SR705 - TX AV Receiver Instruction Manual page 82

TX-SR705_En.book Page 82 Monday, May 28, 2007 2:13 PM
Advanced Setup—Continued
Equalizer Setting
This setting is set automatically by the Automatic
Speaker Setup function (see page 54).
Here you can adjust the EQ of individual speakers. To set
the volume of individual speakers see page 81.
2, 3
1, 8
1
Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu appears onscreen.
2
Use the Up and Down [
buttons to select "2. Speaker
Setup," and then press [ENTER].
The Speaker Setup menu appears.
ENTER
2. Speaker Setup
1. Speaker Settings
2. Speaker Config
3. Speaker Distance
4. Level Calibration
5. Equalizer Settings
6. THX Audio Setup
ENTER
82
3
ENTER
ENTER
1
2-7
4
5
]/[ ]
ENTER
ENTER
Use the Up and Down [ ]/[
buttons to select "5. Equalizer
Settings," and then press
[ENTER].
The Equalizer Settings menu appears.
2–5. Equalizer Settings
Equalizer Off
Use the Left and Right [ ]/[
buttons to select:
Off: Tone off, response flat.
Audyssey: The tone for each speaker
is set automatically by the
Automatic Speaker Setup
function.
Be sure to select this set-
ting after having per-
formed the Automatic
Speaker Setup.
Manual: You can adjust the EQ of
each speaker manually.
If you select Manual, continue with this
procedure. If you select Off or Audys-
sey, go to step 8.
Use the Down [ ] button to
select "Channel," and then use
the Left and Right [ ]/[ ] but-
tons to select a speaker.
2–5. Equalizer Settings
Equalizer Manual
Channel Front
63Hz 0dB
160Hz 0dB
400Hz 0dB
1000Hz 0dB
2500Hz 0dB
6300Hz 0dB
16000Hz 0dB
]
]