Onkyo SR705 - TX AV Receiver Instruction Manual page 90

6_Advnced_En.fm Page 90 Monday, June 4, 2007 2:56 PM
Advanced Setup—Continued
Name Edit
You can enter a custom name for each individual input
selector and radio preset for easy identification. When
selected, the custom name will appear on the display.
1 Select the input selector to which
you want to give a custom name.
To name a radio preset, use the
[TUNER] button to select AM or FM,
and then select the preset.
2
Press the [RECEIVER] REMOTE
MODE button, followed by the
[SETUP] button.
3
Use the Up and Down [ ]/[ ]
buttons to select "4. Source
Setup," and then press [ENTER].
The Source Setup menu appears.
ENTER
4. Source Setup
1. IntelliVolume
2. A/V Sync
3. Name Edit
ENTER
4
Use the Up and Down [ ]/[ ]
buttons to select "Name Edit,"
and then press [ENTER].
The Name Edit screen appears.
ENTER
4–3. Name Edit
Display
Name
ENTER
If you're naming an item for the very
first time, go to step 6.
If the item already has a name, you can
select Default or Custom in step 5.
90
5
6
DVD
7
DVD
Default
: EDIT
ENT
Use the Up and Down [
buttons to select "Display," and
use the Left and Right [
buttons to select:
ENTER
Default: The default name is dis-
played.
Custom: The custom name is dis-
played.
When Default is selected, the station's
frequency appears on the display when
ENTER
a radio preset is selected.
Press the Down [
select "Name," and then press
[ENTER] to open the character
input screen.
ENTER
4-3. Name Edit
Name
ENTER
Use the arrow [
buttons to select a character, and
then press [ENTER].
Repeat this step to enter up to 10
ENTER
characters.
To correct a character:
1. Use the arrow [
buttons to select "
" "(Right) and then press
ENTER
[ENTER].
4-3. Name Edit
123456789
Name
" "
2. Press [ENTER] several times to
select the incorrect character (The
cursor moves one letter each time
[ENTER] is pressed).
3. Use the arrow [
buttons to select the correct charac-
ter, and then press [ENTER].
]/[ ]
]/[ ]
] button to
]/[ ]/[ ]/[ ]
]/[ ]/[ ]/[ ]
"(Left) or
" "
]/[ ]/[ ]/[ ]