Sfc Editor Pop-Up Menu - Omron WS02-CXPC1-V8 - V8.1 REV 02-2009 Operation Manual

Window Components
1-3-3

SFC Editor Pop-up Menu

This section describes menus, which are displayed by right-clicking within the SFC
editor.
The menu displayed depends on which SFC element is selected. Furthermore, menu
items are enabled and disabled depending on the connected state of SFC elements.
Right-Clicking a Step
The step elements menu for working online differs from that for working offline.
Offline Pop-Up Menu
Edit Step Name
Step Type
Step Timer
Add Action
Show Action Blocks
Add Transition and Step
Add Transition
Insert Step and Transition Above
Insert Transition Above
Add Divergences
Add Simultaneous Sequence Convergence
14
Menu
Normal
Initial
Entry
Return
Use Millisecond Timer
Use Second Timer
Boolean Action
New Ladder Action
New Structured Text
Action
Existing Action
Sub-Menu
Enables editing of the selected step
name.
Changes the selected step to a normal
step.
Changes the selected step to an initial
step.
Changes the selected step to a entry
step.
Changes the selected step to a return
step.
Sets the step timer unit to 100
milliseconds.
Sets the step timer unit to 1 second.
Adds a Boolean variable or actual
address to the selected step.
Creates a new ladder program, and
adds it to the selected step.
Creates a new ST program, and adds it
to the selected step.
Adds an already registered action to
the selected step.
Shows hidden action blocks.
Adds a transition and a step, and
connects them to the selected step.
Adds a transition and connects it to the
selected step.
Adds a transition and a step, and
connects them to the topside of the
selected step.
Adds a transition to the topside of the
selected step.
Adds a divergence and 2 transitions,
and connects them to the selected
step.
Adds a simultaneous sequence
convergence and a transition, and
connects them to the selected step.
Section 1-3
Function