Multi Operation And System Off; Programming A Multi-Operation Or A Shutdown Sequence - Pioneer Elite VSX-90TXV Operating Instructions Manual

Controlling the rest of your system
11
When direct function is on, any component you select
(using the input source buttons) will be selected by both
the receiver and the remote control. When you turn direct
function off, you can operate the remote control without
affecting the receiver.
1 While pressing the RECEIVER button, press SETUP.
The remote LCD display shows SETUP.
Use / to select DIRECT F then press ENTER.
2
The LCD on the remote prompts you for the button of the
input source you want to control.
3 Press the input source button for the component
you want to control then press ENTER.
Use / to switch direct function ON or OFF then
4
press ENTER.
The LCD shows OK to confirm the setting.

Multi Operation and System Off

The Multi Operation feature allows you to program a
series of up to five commands for the components in your
system. For example, you could turn on your TV, turn on
your DVD player and start playing the loaded DVD using
only two buttons on the remote control.
Similar to multi operations, System Off allows you to use
one button to stop and switch off a series of components
in your system at the same time.
Programming a multi-operation or a
shutdown sequence
XM RADIO SIRIUS
DVD TV
CD-R/TAPE
CD iPod
SLEEP
1 While pressing the RECEIVER button, press SETUP.
The remote LCD display shows SETUP.
Use / to select MULTI OP or SYS OFF from the
2
menu and press ENTER.
If you selected Multi Operation (MULTI OP), the LCD on
the remote prompts you for an input source button.
If you selected System Off (SYSOFF), go to step 4.
3 Press the input source button for the component
that will start the multi-operation then press ENTER.
For example, if you want to start the sequence by
switching on your DVD player, press DVD.
Note
1 You can't use direct function with the TV CTRL function.
2 • Before Multi Operation and System Off will work correctly, you must setup the remote to work with your TV and other components (see Setting the
remote to control other components on page 61 for more on this).
• Some units may take some time to power up, in which case multiple operations may not be possible.
• Power on and off commands only work with components that have a standby mode.
62
En
1
2
DVR 2
TOP MENU MENU
DVR 1 TV CTRL TUNE
T.EDIT
ST ST
ZONE 2
ENTER
SETUP
TUNER RECEIVER RETURN
TUNE
SB ch ANALOG BAND
GUIDE
ATT
TV CONTROL
Use / to select CODE EDT then press ENTER.
4
To erase any previously stored multi-operations (or
shutdown sequences) select CODE ERS above.
Use / to select a command in the sequence then
5
press ENTER.
If this is the first command in the sequence, select 1ST
CODE. Otherwise, simply choose the next command in
the sequence. PRES KEY flashes after you press ENTER.
6 If necessary, press the input source button for the
component whose command you want to input.
This is only necessary if the command is for a new
component (input source).
7 Select the button for the command you want to
input.
The following remote control commands can be selected:
SYSTEM OFF
RECEIVER INPUT
SOURCE
SELECT
XM RADIO SIRIUS DVR 2
DVD TV DVR 1 TV CTRL
CD-R/TAPE ZONE 2
CD iPod TUNER RECEIVER
SLEEP SB ch ANALOG
ATT
SR+ DIMMER MIDNIGHT/
LOUDNESS
DIALOG E PHASE S.RETRIEVER
D.ACCESS CLASS
+10
DISC
ENTER
MENU
TOP MENU
TUNE
ST ST T.EDIT
ENTER
SETUP RETURN
TUNE
BAND
GUIDE
• You don't need to program the receiver to switch on
or off. This is done automatically.
With Pioneer components, you don't need to:
• program the power to switch off in a shutdown
sequence (except DVD recorders);
• program the power to switch on if it's the source
component selected in step 3;
• program a Pioneer TV or monitor to switch on if the
input function (selected in step 2) has video input
terminals;
These take priority in multi operations (not shutdown).
TV CONTROL
INPUT
TV VOL TV CH
VOL
SELECT
ANT REC INFO
MUTE
MPX REC STOP JUKEBOX
HDD DVD
AUDIO SUBTITLE
DISP CH CH
PHOTO
STEREO/
THX STANDARD ADV.SURR
F.S.SURR
MULTI OPE AUTO SURR ACOUSTIC EQ SIGNAL SEL
SHIFT EFFECT/CH SEL LEVEL
RECEIVER