Listening To Your System; Auto Playback; Listening In Surround Sound; Standard Surround Sound - Pioneer Elite VSX-90TXV Operating Instructions Manual

Audio/video multi-channel receiver
Hide thumbs Also See for Elite VSX-90TXV:
Table of Contents

Advertisement

Listening to your system

Chapter 5:
Listening to your system
Important
• The listening modes and many features described in
this section may not be available depending on the
current source (for example, PCM 88.2 kHz/96 kHz,
DTS 96 kHz (24 bit) or WMA9 Pro), settings and status
of the receiver. See Listening modes with different
input signal formats on page 74 for more on this.
Tip
• The listening modes described below can also be
selected using the front panel controls. Simply press
LISTENING MODE repeatedly to access the modes
you want, then use the MULTI JOG to select a
particular listening mode (after five seconds the
mode is automatically set).

Auto playback

There are many ways to listen back to sources using this
receiver, but for the simplest, most direct listening option
is the Auto Surround feature. The receiver automatically
detects what kind of source you're playing and selects
multichannel or stereo playback as necessary.
THX
STANDARD
MULTI OPE
AUTO SURR
SHIFT
EFFECT/CH SEL
RECEIVER
While listening to a source, press AUTO SURR for
auto playback of a source.
AUTO SURROUND shows briefly in the display before
showing the decoding or playback format. Check the
digital format indicators in the front panel display to see
how the source is being processed.
• When listening to XM Radio, the XM HD Surround
feature is selected automatically (see Using XM HD
Surround on page 45 for more on this).
Note
1 • Stereo surround (matrix) formats are decoded accordingly using Neo:6 CINEMA or 2 Pro Logic IIx MOVIE (see Listening in surround sound above
for more on these decoding formats).
• The Auto Surround feature is canceled if you connect headphones or select the multichannel analog inputs.
2 For more options using this button, see Using Stream Direct on page 30.
3 In modes that give 6.1 channel sound, the same signal is heard from both surround back speakers.
4 If surround back channel processing (page 30) is switched OFF, or the surround back speakers are set to NO (this happens automatically if the Surround
back speaker setting on page 35 is set to anything but Normal (SB)), 2 Pro Logic IIx becomes 2 Pro Logic II (5.1 channel sound).
5 When listening to 2-channel sources in Dolby Pro Logic IIx Music mode, there are three further parameters you can adjust: Center Width, Dimension,
and Panorama. See Setting the effect options on page 29 to adjust them.
6 When listening to 2-channel sources in Neo:6 Music mode, you can also adjust the center image effect (see Setting the effect options on page 29).
1
PHOTO
STEREO/
ADV.SURR
F.S.SURR
ACOUSTIC EQ
SIGNAL SEL
LEVEL
2

Listening in surround sound

Using this receiver, you can listen to any source in
surround sound. However, the options available will
depend on your speaker setup and the type of source
you're listening to.
If you connected surround back speakers, see also Using
surround back channel processing on page 30.

Standard surround sound

The following modes provide basic surround sound for
stereo and multichannel sources.
THX
STANDARD
MULTI OPE
AUTO SURR
SHIFT
EFFECT/CH SEL
RECEIVER
While listening to a source, press STANDARD.
If necessary, press repeatedly to select a listening mode.
• If the source is Dolby Digital, DTS, or Dolby Surround
encoded, the proper decoding format will
automatically be selected and shows in the display.
With two channel sources, you can select from:
• 2 Pro Logic IIx MOVIE – Up to 7.1 channel sound,
especially suited to movie sources
• 2 Pro Logic IIx MUSIC – Up to 7.1 channel sound,
especially suited to music sources
• 2 Pro Logic IIx GAME – Up to 7.1 channel sound,
especially suited to video games
• 2 PRO LOGIC – 4.1 channel surround sound (sound
from the surround speakers is mono)
• Neo:6 CINEMA – 6.1 channel sound, especially
suited to movie sources
• Neo:6 MUSIC – 6.1 channel sound, especially suited
6
to music sources
With multichannel sources, if you have connected
surround back speaker(s) and have selected SBch ON, you
can select (according to format):
3
PHOTO
STEREO/
ADV.SURR
F.S.SURR
ACOUSTIC EQ
SIGNAL SEL
LEVEL
5
05
4
27
En

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents