Table of Contents
Advertisement
Controls and displays
04
Display
AUTO
DIGITAL
ANALOG
STREAM DIRECT
2
PRO LOGIC
THX
STEREO
SP
14
15
1
SIGNAL indicators
Light to indicate the currently selected input signal.
AUTO lights when the receiver is set to select the input
signal automatically (page 30).
2
Program format indicators
These change according to which channels are active in
digital sources.
L – Left front channel
C – Center channel
R – Right front channel
SL – Left surround channel
S – Surround channel (mono)
SR – Right surround channel
SBL – Left surround back channel
SB – Surround back channel (mono)
SBR – Right surround back channel
LFE – Low frequency effects channel
3
Digital format indicators
Light when a signal encoded in the corresponding format
is detected.
4
S.RTRV
Lights when the Sound Retriever is switched on (page 32).
5
MULTI-ZONE
Lights when the MULTI-ZONE feature is active (page 50).
6
PHASE CONTROL
Lights when the Phase Control is switched on (page 10).
7
OVER / ATT
OVER lights to indicate that the level of an analog source
is too high. ATT lights when you use the attenuator
(ANALOG ATT) to reduce it.
8
V.SB
Lights during Virtual surround back processing (page 31).
9
TUNER indicators
TUNED – Lights when a broadcast is being received.
STEREO – Lights when a stereo FM broadcast is
being received in auto stereo mode.
MONO – Lights when the mono mode is set using
the MPX button.
24
En
1
2
3
2
DIGITAL
L
C
R
WMA9 Pro
DTS
SL
S
SR
SBL SB
SBR
LFE
eo
N
: 6
ADV.SURROUND
STANDARD
AB
SLEEP
16
17
18
4
5
6
7
FULL BAND
MULTI-ZONE
DIALOG E
ATT
OVER
S.RTRV
SOUND
V.SB
DVR
19
10 DIALOG E
Lights when the Dialog Enhancement feature is switched
on (page 32).
11 SOUND
Lights when any of the Midnight, Loudness or tone
controls feature is selected (page 32).
12 Master volume level
13 SR+
Lights when the SR+ mode is switched on (page 54).
14 STREAM DIRECT
Lights when the Stream Direct mode is selected
(page 30).
15 Speaker indicators
Indicate the current speaker system, A and/or B (page 48).
16 Listening mode indicators
THX – Lights when a Home THX mode is selected.
ADV.SURROUND – Lights when an Advanced
Surround mode has been selected (page 28).
STEREO – Lights when the stereo mode is selected
(page 29).
STANDARD – Lights when a Standard Surround
mode is switched on (see Listening in surround
sound on page 27).
17 SLEEP
Lights when the receiver is in sleep mode (page 59).
18 Matrix decoding format indicators
2PRO LOGIC IIx – This lights to indicate 2 Pro
Logic II / 2 Pro Logic IIx decoding (page 27).
Neo:6 – When one of the Neo:6 modes of the receiver
is on, this lights to indicate Neo:6 processing
(page 27).
19 Character display
Displays various system information.
8
9
10
11
12
13
TUNED
RDS
STEREO
EON
MONO
dB
SR+
Hide quick links:
Advertisement
Table of Contents
