Convert Application - Omron NTXS Manual

Miscellaneous
11.1

Convert Application

This utility allows you to convert the application of one product into the other product.
NT3S-ST121B-E and NT3S-ST123B-E support RTC. But NT3S-ST124B-E and NT3S-ST126B-E do not
support RTC. So the application of NT3S-ST121B-E is compatible for the product NT3S-ST123B-E
without removing any task associated with RTC. In the same way the application of NT3S-ST124B-E is
applicable to the product NT3S-ST126B-E. This saves the time required for creating new application.
But if you want to convert an application from NT3S-ST121B-E, which supports RTC, to the NT3S-
ST124B-E , which does not support RTC, software will not allow such conversion. In such case you
have to remove all the tasks associated with the RTC from the application of NT3S-ST121B-E.
When you click on "Convert application" tool, first it will display the message for closing the screen
session as follows.
When you click on OK, it displays the list of other products in which application can be converted.
Select the desired product and click on OK. It will ask for the confirmation and converts the application.
159