Task Management
Add a Constant Value To Tag
This tag is used for adding a constant value to the current value of the tag.
E.g.- Tag = Tag + Number
This task is executed on register tag listed under Tag option. User can add only two byte number in
selected tag.
For this task default setting is shown under 'Register operations'. If user change this selection, task will
be changed. User can select number type - unsigned int, Signed, Hexadecimal, BCD and Binary.
Click 'OK' to add task in task list.
118
Tag Type
Operation
1 Byte
+
2 Byte
+
4 Byte
+
Number
Result
2 Byte
1 Byte
2 Byte
2 Byte
2 Byte
Lower 2 Byte