Omron NTXS Manual page 46

Before you Begin
Following serial printing parameters can be set-
Baud Rate
Parity
Number of Bits
Number of columns
Terminating character
Number of characters
to print
Click 'Ok' to set printer setting.
3. For PLC Communication
Protocol - User can select desired PLC from the list of available drivers. In the example shown above,
user has selected Omron Host Link at Com1.
40
- Supported Baud rates are 4800, 9600, 19.2K, 38.4K, 57.6K and
115.2K.
- Can be None, Even or Odd.
- Can be 7 or 8.
- Can be from minimum 1 to maximum 80.
- Can be None, CR(Carriage Return), LF(Line Feed) or CR+LF.
- Can be from minimum 1 to maximum 256.