Installation
E5AR
1. Ensure waterproofing by mounting with waterproof packing.
2. Insert the E5AR into the mounting hole panel.
3. Insert the mounting brackets into the grooves on the top and bot-
tom of the rear case.
4. Tighten the screws on the mounting brackets alternately, keeping
an even balance, until the ratchet stops tightening.
Waterproof packing
A R
E 5
E5ER
1. Ensure waterproofing by mounting with waterproof packing.
2. Insert the E5ER into the mounting hole panel.
3. Insert the mounting brackets into the grooves on the top and bot-
tom of the rear case.
4. Tighten the screws on the mounting brackets alternately, keeping
an even balance, until the ratchet stops tightening.
Digital Controllers
Waterproof packing
E R
E 5
E5AR/E5ER
37