Omron E5 R Selection Manual page 31

Dimensions
Note: All units are in millimeters unless otherwise indicated.
96
120 min.
Rubber Packing (Sold Separately)
Y92S-P5 (for E5ER)
If the rubber packing is lost or damaged, it can be
ordered using the following model number: Y92S-P5.
(Depending on the operating environment, deteriora-
tion, contraction, or hardening of the rubber packing
may occur and so, in order to ensure the level of
waterproofing specified in NEMA4, periodic replace-
ment is recommended.)
Note:Rubber packing is provided with the Controller.
Terminal Cover (Sold Separately)
E53-COV15 (for E5ER)
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
11.5
48
3
Panel Cutouts
+0.8
45
0
60 min.
Recommended panel thickness is 1 to 8 mm.
Group mounting is not possible. (Maintain the
specified mounting space between Controllers.)
+0.8
92
0 When two or more Controllers are mounted,
make sure that the surrounding temperature
does not exceed the allowable operating
temperature specified in the specifications.
48
95
28.5
10.1
110
95 (99)*
Terminal cover (E53-COV15; sold separately)
2
1
2
3
4
5
6
111
1
2
3
4
5
6
* The value in parentheses are for
DeviceNet-compatible Controllers.
DeviceNet-compatible Controllers, Rear Panel
Unit Label Sheet (Sold Separately)
Y92S-L1
Digital Controllers
Crimp terminal size: M3
MS/NS Indicators
Top: MS
Bottom: NS
DeviceNet communications
connector
Used to connect the
DeviceNet communications
cables. The DeviceNet
communications power is
also supplied through this
connector.
The connector included with
the DeviceNet-compatible
Controllers is the FKC 2.5/5-
STF-5.08 AU M (PHOENIX
CONTACT).
11.8
E5ER
4.8
31