Omron CRT1 - 10-2009 Operation Manual page 114

Power Supply Wiring
Units with e-CON
Connectors
(CRT1-VOD08S(-1))
Connection to the connector for the sensor power supply connector (for CRT1-
VAD04S only)
90
24-VDC
power
supply
Peel back the coating on the included power supply cable and connect it to
the 24-VDC power supply, then attach the power supply cable connector to
the output I/O power supply connector on the bottom of the unit.
24-VDC
Red
power
supply
Black
Power supply cable
(provided)
E-CON connector type Analog Input Slave Units (CRT1-VAD04S) are
equipped with a sensor power supply connector for supplying of power to the
connected sensor.
Peel back the coating on the included power supply cable and connect the
wires to the 24-VDC power supply, then attach the power supply cable con-
nector to the sensor power supply connector on the bottom of the unit.
24-VDC
power supply
Power supply cable (provided)
V terminals
G terminals
Output I/O power supply connector
Bottom of Unit
Output I/O power supply connector
Bottom of Unit
Red
Black
Sensor power supply connector
Section 3-5