Naming Connected Devices - Omron CRT1 - 10-2009 Operation Manual

Functions Common to All Slave Units

11-2-6 Naming Connected Devices

Description
Settings Using the CX-Integrator
1,2,3...
The user can set any name for each I/O contact in the Unit (with up to 32
characters). These names are stored in the Slave Unit memory. Connected
devices can be checked for each I/O contact, which is useful for remote main-
tenance and other applications where, for example, devices with errors need
to be identified. The CX-Integrator or explicit messages can be used to read/
write the name (i.e., comment).
CompoNet network
Slave Unit
Connected device
name
Connected device
1. Turn ON the power supply to the CompoNet Slave Unit.
2. Double-click the icon of the Slave Unit to set in the Network Configuration
Window to open the Configuration Window. (Alternatively, right-click the
icon and select Parameters - Edit from the pop-up menu.)
3. Click the IN or OUT Tab.
CX-Integrator
Connected device name (comment)
Stored in Slave Unit memory
Section 11-2
491