Temperature Input Unit Functions
11-6-6 Rate of Change Calculation
Description
550
3. Click the tab for the input where top/valley count is to be used, and select
the Top/Valley Check Box in the Function Choice Area.
4. Select the Top/Valley Tab Page and select Top Count or Valley Count in
the Count Type Field.
5. Set the monitor value for the top/valley counter.
6. Return to the General Tab Page, click the Transfer [PC to Unit] Button to
download the data, and then click the Reset Button to reset the Unit.
7. Click the OK Button and exit the window.
The rate of change can be obtained for each sampling cycle set for the tem-
perature input data. This function calculates the difference between the cur-
rent sampling cycle the previous cycle. The sampling cycle can be set to
Section 11-6