Sixteen-Point Output Units (3-Tier Terminal Block) - Omron CRT1 - 10-2009 Operation Manual

Units with Screw Terminal Blocks

5-3-13 Sixteen-point Output Units (3-tier Terminal Block)

CRT1-OD16TA/CRT1-OD16TA-1/CRT1-OD16TAH/CRT1-OD16TAH-1
Output Section Specifications
Item
Model
I/O capacity
Internal I/O common
Rated output current
Residual voltage
Leakage current
ON delay
OFF delay
Number of circuits per common 8 outputs/common
Load short-circuit detection
Disconnection detection
Isolation method
Output indicators
Installation
Power supply type
Current supplied to output
devices
Communications power supply
current consumption
I/O power supply current con-
sumption
Output handling for communi-
cations errors
Weight
Note
CRT1-OD16TA CRT1-OD16TA-1
16 outputs
NPN PNP
0.5 A/output, 2 A/common
1.2 V max. (0.5 A 1.2 V max. (0.5 A
DC, between each DC, between each
output terminal and output terminal and
the G terminal) the V terminal)
0.1 mA max.
0.5 ms max.
1.5 ms max.
---
---
Photocoupler
LED (yellow)
DIN Track
Multi-power supply
100 mA/points
45 mA max. for 24-VDC power supply
voltage
65 mA max. for 14-VDC power supply
voltage
15 mA max. for 24-VDC power supply
voltage
Select either hold or clear from CX-Integrator.
330 g max.
Please see "Appendix E: I/O Power Supply Current" regarding the I/O power
supply current supplied to the V and G terminals.
Specification
CRT1-OD16TAH
NPN
1.2 V max. (0.5 A
DC, between each
output terminal and
the G terminal)
Supported.
Operates at 3 mA/point max. (Does not
operate at over 3 mA.)
40 mA max. for 24-VDC power supply
voltage
70 mA max. for 14-VDC power supply
voltage
15 mA max. for 24-
VDC power supply
voltage
Section 5-3
CRT1-OD16TAH-1
PNP
1.2 V max. (0.5 A
DC, between each
output terminal and
the V terminal)
35 mA max. for 24-
VDC power supply
voltage
183