Omron CPM2A - 11-2005 Manual page 126

Programming Console Operations
Program Read then Monitor
1, 2, 3...
Bit Monitor
1, 2, 3...
Word Monitor
1, 2, 3...
108
When a program address is being displayed, the status of the bit or word in that
address can be monitored by pressing the MONTR Key.
1. Press the CLR Key to bring up the initial display.
2. Input the desired program address and press the Down Arrow Key.
C A A
2 0 0
3. Press the MONTR Key to begin monitoring.
MONTR
If the status of a bit is being monitored, that bit's status can be changed using
the Force Set/Reset operation. Refer to 4-2-26 Force Set, Reset for details.
If the status of a word is being monitored, that word's value can be changed
using the Hexadecimal/BCD Data Modification operation. Refer to 4-2-22
Hexadecimal, BCD Data Modification, 4-2-23 Binary Data Modification,
4-2-24 Signed Decimal Data Modification, and 4-2-25 Unsigned Decimal
Data Modification for details.
4. Press the CLR Key to end monitoring.
Follow the procedure below to monitor the status of a particular bit.
1. Press the CLR Key to bring up the initial display.
2. Input the bit address of the desired bit and press the MONTR Key.
B
CONT
SHIFT 1 MONTR
#
The Up or Down Arrow Key can be pressed to display the status of the pre-
vious or next bit.
The displayed bit's status can be changed using the Force Set/Reset opera-
tion. Refer to 4-2-26 Force Set, Reset for details.
3. Press the CLR Key to end monitoring.
Follow the procedure below to monitor the status of a particular word.
1. Press the CLR Key to bring up the initial display.
2. Input the word address of the desired word.
CH
*EM
SHIFT
LR
*DM
3. Press the MONTR Key to begin monitoring.
MONTR
The Up or Down Arrow Key can be pressed to display the status of the pre-
vious or next word.
The displayed word's status can be changed using the Hexadecimal/BCD
Data Modification operation. Refer to 4-2-22 Hexadecimal, BCD Data Modi-
fication, 4-2-23 Binary Data Modification, 4-2-24 Singed Decimal Data Mod-
ification, and 4-2-25 Unsigned Decimal Data Modification for details.
↓
CLR
CLR
B
1
Section 4-2