Omron CPM2A - 11-2005 Manual page 102

Wiring and Connections
Using a CQM1-CIFjj
IBM PC/AT or
compatible
computer
Using an XW2Z-j00S Cable
XW2Z-j00S
IBM PC/AT
or compatible
computer
Peripheral Port Connection
Connect to the CPU Unit's Peripheral port with a CQM1-CIF01 or CPM1-CIF01
RS-232C Adapter.
CPM2A
CQM1-CIF02
Peripheral port
RS-232C Port Connection
Connect to the CPU Unit's RS-232C port with an XW2Z-j00S or
XW2Z-j00S-V Connecting Cable.
CPM2A
RS-232C port
Note The XW2Z-j00S cables have a D-Sub 25-pin connector and the
XW2Z-j00S-V cables have a D-Sub 9-pin connector.
Cables and Adapters
CPM2A port Cable length
Peripheral p
3.3 m
3.3 m +
0.15 m
RS-232C 2 m
5 m
2 m
5 m
Communications Settings
Set the CPU Unit's Communications Switch to ON when using the standard
communications settings
Setup.
Note The standard settings are: Host Link, 9,600 bps, 7-bit data, 1 start bit, 2 stop bits,
and even parity. Refer to Section 1 PC Setup in the Programming Manual
(W353) for details on settings.
Using a CPM1-CIF01
CPM1-CIF01
IBM PC/AT or
XW2Z-j00S
compatible
computer
Using an XW2Z-j00S-V Cable
XW2Z-j00S-V
IBM PC/AT or
compatible
computer
Model number
For a 25-pin computer serial port
CQM1-CIF02
CPM1-CIF01 +
XW2Z-S001
XW2Z-200S For a 25-pin computer serial port
XW2Z-500S
XW2Z-200S-V For a 9-pin computer serial port
XW2Z-500S-V
1
. Set the switch to OFF to use the settings in the PC
Section 3-4
CPM2A
Peripheral port
CPM2A
RS-232C port
Comments
p p p
p p p
p p p
83