Adjusting The Headset To The Listening Situation - Sennheiser S1 DIGITAL Instruction Manual

Using the S1 DIGITAL
Switching the Bluetooth function off
If you switch the Bluetooth function off, NoiseGard
switched on.

Adjusting the headset to the listening situation

Adjusting the volume
WARNING
Danger of hearing damage!
Listening at high volume levels for long periods can lead to permanent
hearing defects.
Before putting the headset on, set the volume to a low level.
Do not continuously expose yourself to high volumes.
The control unit features a Master
adjust the volume for the left and right channel separately. Using the Master
VOLUME slide control you simultaneously adjust the volume for both ATC commu-
nications and your connected Bluetooth device.
1 Use the Master
level.
2 Use the Volume
your connected Bluetooth device to the volume for ATC communications.
1
Vol + Vol +
Vol – Vol –
18 | S1 DIGITAL
Press and hold the multi-function button
LED flashes 3 times red.
You hear a descending beep.
The Bluetooth function is deactivated.
VOLUME
VOLUME slide control to adjust the volume to a comfortable

button and the Volume
TM
slide control which allows you to

button to adjust the volume of
2
until the
/digital remains
Vol +
Vol –