Putting the S1 DIGITAL into operation
Type of use
TM
NoiseGard
/digital
TM
NoiseGard
/digital and
Bluetooth technology
If the battery capacity is low, the headset automatically switches off to protect
the batteries/rechargeable batteries from total discharge and leakage.
Replace the batteries or recharge the rechargeable batteries.
Attaching the belt clip, the cable clip and the design caps
Attaching the belt clip
The belt clip allows you to attach the control unit to the seat belt so that the
control unit doesn't hinder you.
1
Slide the belt clip onto the seat belt.
2
Snap the control unit into the belt clip. Make sure not to squeeze any connec-
tion cable.
1
10 |
S1 DIGITAL
Type
Alkaline batteries/rechargeable
batteries
Lithium batteries
Alkaline batteries/rechargeable
batteries
Lithium batteries
2
Operating time
approx. 25 hrs
approx. 40 hrs
approx. 15 hrs
approx. 25 hrs