Table of Contents
Advertisement
Using the S1 DIGITAL
Switching between mono and stereo mode
The control unit features a mono /stereo
switch between mono and stereo mode, depending on the intercom.
Set the mono /stereo
= mono
= stereo
Using Smart Update
The noise level in the cockpit changes depending on the flight situation. When-
ever you perceive a change in the noise level (e.g. during take off and when the
cruise altitude is reached), you should perform the Smart Update in order to
ensure optimum noise compensation at any given time.
The outer and inner microphones measure the sound and NoiseGard
adjusted accordingly via the electronics. Smart Update only works when the
headset is switched on.
F
switch
to the desired position:
Press the Smart Update button.
The Smart Update button lights up for approx.
4 seconds and you hear an acknowledgement
tone, indicating that NoiseGard
adjusted to the noise level.
F
switch
which allows you to
TM
S1 DIGITAL
TM
/digital is
/digital is
| 19
Hide quick links:
Advertisement
Table of Contents
