Important Safety Information - Sennheiser S1 DIGITAL Instruction Manual

Hide thumbs Also See for S1 DIGITAL:
Table of Contents

Advertisement

Important safety information

Important safety information
Please read this instruction manual carefully and completely before using the
product.
Always include this instruction manual when passing the product on to third
parties.
This instruction manual is also available on the Internet at
www.sennheiser-aviation.com or www.sennheiser.com.
Preventing health problems and accidents
Always maintain a distance of at least 3.94" (10 cm) between the ear cups and
the cardiac pacemaker or implanted defibrillator since the product generates
permanent magnetic fields.
Keep product, accessory and packaging parts out of reach of children who
could swallow smaller pieces.
Switch the product off after use to conserve battery power. Remove the
rechargeable batteries if the product will not be used for extended periods of
time.
If during flight operation you, as the pilot, operate your connected Bluetooth
device using the headset, this can limit your attention. During flight operation,
do not use the headset for making phone calls or listening to music.
With the NoiseGard
sounds (for example, those from engines, propellers, warning alarms, etc.) may
sound different to you. Before operating any aircraft, make sure that, with
TM
NoiseGard
/digital switched on, you can hear and recognize these sounds. Set
the volume to safe levels that do not interfere with your ability to hear infor-
mational sounds and warning alarms.
The product is capable of producing sound pressure exceeding 85 dB(A). In
many countries 85 dB(A) is the maximum legally permissible level for contin-
uous noise exposure during the working day. Do not listen at high volume
levels for long periods of time to prevent hearing damage.
Preventing damage to the product and dysfunctions
Always keep the product dry and do not expose it to extreme temperatures
(hairdryer, heater, extended exposure to sunlight, etc.) to avoid corrosion or
deformation.
Only use the product in environments where wireless Bluetooth transmission
is permitted.
Only clean the product with a soft, dry cloth.
Never repair or attempt to repair a defective product yourself. Contact your
Sennheiser partner or the Sennheiser Service Department.
2 |
S1 DIGITAL
TM
/digital noise compensation switched on, typical aircraft
®

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents