11
Getting started
Adjusting and wearing the headset
Adjusting the volume
Adjusting the headset's microphone volume for softphones
ADAPT 360 | ADAPT 360 White
1
2
3
x
Softphone
Bluetooth
headset
®
For good sound quality and best possible wearing comfort,
adjust the headset.
Put the headset on so that the headband runs over the
X
top of your head and the side with the R marking rests
on your right ear.
Adjust the headset so that
X
• your ears are comfortably covered by the ear pads,
• you feel even, gentle pressure around your ears,
• a snug fit of the headband on the head is ensured.
You can adjust three independent volume settings for the
headset:
1.
Call volume: during an active call
2.
Audio volume: during audio streaming
3.
Volume for ring tone, tones and voice prompts:
in idle mode – no active call or audio streaming
Press the Volume button to increase or decrease the
X
volume.
You hear a beep or double beep for maximum or
minimum volume.
Alternatively you can adjust the volume on your connected
device.
Initiate a call on your connected device to someone
X
who will help you find the correct volume setting for
your microphone.
Change the microphone volume in your softphone
X
application and/or in your PC audio application.