Using The Audio Cable; Using The Usb Cable - Sennheiser EPOS ADAPT 660 User Manual

10 Getting started

Using the audio cable

Use the audio cable for media playback when the battery is low or when Bluetooth transmission is restricted or not allowed.
Bluetooth immediately turns off once the audio cable is connected to the headset.
i
You can use the Active Noise Cancellation (ANC) as usual (see page 14).

Using the USB cable

Use the USB cable for calls via softphone or media playback via USB and charging.
Connect the supplied USB cable to the USB socket of the headset and a USB socket of your computer.
X
The battery is being charged – see page 22.
Click the Audio icon on your PC and select EPOS ADAPT 660.
X
ADAPT 660 Bluetooth
®
headset
Insert the small jack plug into the audio socket of the
X
headset.
Bluetooth is deactivated.
Connect the 3.5 mm jack plug to the audio output of
X
your mobile device.
To disconnect the audio cable:
Pull the plug out of the headset and your mobile device.
X
The headset automatically tries to connect to available
paired Bluetooth devices.
EPOS ADAPT 660