Table of Contents
Advertisement
2.
Detach the NFC module (2) from the computer. The NFC module is attached to the computer with
double-sided adhesive.
To replace the NFC module, reverse the removal procedures.
Touchpad cable
To remove the touchpad cable, use this procedure and illustration.
The touchpad cable is included in the Cable Kit, spare part number N96591-001.
Before removing the touchpad cable, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Remove the battery (see
Remove the touchpad cable:
1.
Release the ZIF connector (1) the touchpad cable is connected to, and then disconnect the
touchpad cable from the system board.
2.
Release the ZIF connector (2) the touchpad cable is connected to, and then disconnect the
touchpad cable from the touchpad.
Preparation for disassembly on page
Bottom cover on page
Battery on page
54).
42).
54).
Touchpad cable
83
Advertisement
Table of Contents
