Table of Contents
Advertisement
1.
Release the ZIF connector (1) the fingerprint reader cable is connected to, and then disconnect the
fingerprint reader cable from the fingerprint reader.
2.
Remove the fingerprint reader cable (2) from the computer.
To replace the fingerprint reader cable, reverse the removal procedures.
Touchpad cable
To remove the touchpad cable, use this procedure and illustration.
The touchpad cable is included in the Cable Kit, spare part number N96922-001.
Before removing the touchpad cable, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Remove the battery (see
Remove the touchpad cable:
1.
Release the ZIF connector (1) the touchpad cable is connected to, and then disconnect the
touchpad cable from the system board.
2.
Release the ZIF connector (2) the touchpad cable is connected to, and then disconnect the
touchpad cable from the touchpad.
Preparation for disassembly on page
Bottom cover on page
Battery on page
41).
39).
39).
Touchpad cable
67
Advertisement
Table of Contents
