Nfc Module Cable - HP EliteBook 660 G11 Maintenance And Service Manual

2. Remove the fingerprint reader cable (2) from the computer.
To replace the fingerprint reader cable, reverse the removal procedures.

NFC module cable

To remove the NFC module cable, use this procedure and illustration.
Table 6-10 NFC module cable description and part number
Description
NFC module cable (includes double-sided adhesive)
Before removing the NFC module cable, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery
(see Battery on page
4. Remove the SSD (see
Remove the NFC module cable:
1. Release the ZIF connector (1) the NFC module cable is connected to, and then disconnect the NFC
module cable from the system board.
2. Release the ZIF connector (2) the NFC module cable is connected to, and then disconnect the NFC
module cable from the NFC module.
Preparation for disassembly on page
Bottom cover on page
54).
Solid-state drive on page
42).
47).
Spare part number
N96724-001
54).
NFC module cable 81