Table of Contents
Advertisement
To reassemble and replace the display assembly, reverse the removal procedures.
Touchpad cable
To remove the touchpad cable, use this procedure and illustration.
Table 5-9
Touchpad description and part number
Description
Touchpad cable (includes double-sided adhesive)
Before removing the touchpad cable, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Disconnect the battery cable from the computer (see
Remove the touchpad cable:
1.
Release the ZIF connector (1) the touchpad cable is connected to, and then disconnect the
touchpad cable from the system board.
2.
Release the ZIF connector (2) the touchpad cable is connected to, and then disconnect the
touchpad cable from the touchpad.
3.
Detach the touchpad cable (3) from the computer. The touchpad cable is attached to the computer
with double-sided adhesive.
4.
Remove the touchpad cable.
To replace the touchpad cable, reverse the removal procedures.
52
Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
33).
Battery on page
Spare part number
N94794-001
33).
35).
Advertisement
Table of Contents
