Installing Memory Modules - Siemens SIMATIC IPC RC-545A Operating Instructions Manual

Expanding and assigning parameters to the device
7.3 Installing and removing memory modules
7.3.2

Installing memory modules

Requirement
• You are familiar with the important safety instructions under "Safety instructions on
device and system extensions (Page 50)".
• You are familiar with the information under "Information on using memory modules
(Page 81)".
• The device is fully disconnected from the mains voltage, see "Switching off the device
(Page 72)".
Location of the memory modules on the motherboard
Order when installing multiple memory modules
If you install several memory modules, install them one after the other in the following order:
• Memory module 1: DIMM_A1 slot
• Memory module 2: DIMM_B1 slot
The slots of the memory modules are labeled on the motherboard.
82
Client SIMATIC IPC RC-545A
Operating Instructions, 03/2024, A5E53092314-AA