Connecting I/O Devices; Connecting External Devices; Connecting Audio Devices - Siemens SIMATIC IPC RC-545A Operating Instructions Manual

Connecting the device

4.4 Connecting I/O devices

4.4 Connecting I/O devices
4.4.1

Connecting external devices

Fault caused by I/O devices
The improper connection of I/O devices can cause faults in the device.
The result may be personal injury and damage to the machine or plant.
Be sure to follow the Instructions for connecting I/O devices (Page 48).
Procedure
Note
Use the original connections of the I/O to be connected without adapters or extensions.
1. Connect the I/O devices to the respective interfaces. Information on the position of the
interfaces is available in "Device ports (Page 23)".
2. Secure the cables (Page 70) with a strain relief.
4.4.2

Connecting audio devices

Requirement
• You have observed the information under "Connecting external devices (Page 66)" and
under "Technical specifications of the connections on the device (Page 137)"
Procedure
Note
Use the original connection technology of the audio devices to be connected without
adapters and extensions.
1. Connect the I/O devices to the respective interfaces. Information on the position of the
interfaces is available in "Device ports (Page 23)".
2. Secure the cables (Page 70) with a strain relief.
66
CAUTION
Client SIMATIC IPC RC-545A
Operating Instructions, 03/2024, A5E53092314-AA