Installing The Operating System, Software, And Driver; Restoring The Operating System And Partitions With The Simatic Ipc Usb Flash Drive; Installing Software And Drivers - Siemens SIMATIC IPC RC-545A Operating Instructions Manual

Device maintenance and repair

8.4 Installing the operating system, software, and driver

8.4 Installing the operating system, software, and driver
8.4.1 Restoring the operating system and partitions with the SIMATIC IPC USB
flash drive
For information on restoring the operating system you ordered with the device in the
detailed description of the operating system, see "Important instructions and manuals for
operating the device (Page 10)".
8.4.2

Installing software and drivers

Requirement
• All files for installing software and drivers are on a bootable USB flash drive.
The following methods can be used to obtain a bootable USB flash drive containing these
files:
– You have ordered a bootable USB flash drive to accompany the delivery of the device.
– You create this bootable USB flash drive yourself.
Creating a bootable USB flash drive yourself
Requirement
You know the serial number and article number of the device for which you want to install
software or drivers. You can find information on this under "Device identification data
(Page 56)".
1. On the Internet, go to "Online Service Delivery Portal
(https://www.automation.siemens.com/swdl/register/ipc)".
2. Log in with your credentials or register.
3. Enter the serial number and article number of the device for which you want to install
software or drivers.
4. Download the ISO file appropriate for your device locally.
5. Follow the instructions to create a bootable USB flash drive. For instructions on how to do
this, see "Important instructions and manuals for operating the device (Page 10)".
Installing software and drivers from the bootable USB flash drive
1. In the firmware settings, set the device to boot from the USB flash drive at the next startup.
2. You can find information on this in the user manual for the motherboard. See "Important
instructions and manuals for operating the device (Page 10)".
3. Insert the provided USB stick into the device.
4. Run the file "START_DocuAndDrivers.CMD".
The "Documentation and Drivers" suite opens.
5. Install the required components.
126
Client SIMATIC IPC RC-545A
Operating Instructions, 03/2024, A5E53092314-AA