Connecting The Device; Country-Specific Information On Supply Voltage - Siemens SIMATIC IPC RC-545A Operating Instructions Manual

Connecting the device

4.1

Country-specific information on supply voltage

Country-specific information on supply voltage in USA and Canada
Supply voltage 120 V / 230 V / 240 V
Ensure that the power supply cables used are rated for the maximum current consumption
and maximum ambient temperature of the device and that they meet the requirements of
the following standards:
• ANSI/UL 817
• CSA C22.2 No. 21
Ensure that the device connectors, connector sockets, and connection materials are rated for
the maximum current consumption and maximum ambient temperature of the device and
that they meet the requirements of the following standards:
• ANSI/UL 498 and CSA C22.2 No. 42
• CSA C22.2 No. 182.1
• CSA C22.2 No. 182.2
• CSA C22.2 No. 182.3
Country-specific information on supply voltage outside of USA and Canada
Supply voltage 230 V AC
This device is supplied with a safety-tested power supply cable and may only be connected to
a grounded socket outlet.
If you do not use the power supply cable, use a flexible cable which is rated for the maximum
current consumption and maximum ambient temperature of the device and also complies
with the safety regulations of the country in which the device is installed.
Power supply cables and device plugs must bear the prescribed markings.
62
Client SIMATIC IPC RC-545A
Operating Instructions, 03/2024, A5E53092314-AA
4