Installing Memory Modules - Siemens SIMATIC IPC647E Operating Instructions Manual

Expanding and assigning parameters to the device
6.3 Installing and removing memory modules
6.3.2

Installing memory modules

You can find information on the location of slots for memory modules under "Internal
construction of the device (Page 30)".
Requirements
• You know the important safety instructions under "Safety instructions on device and
system extensions (Page 46)".
• You are familiar with the information under "Information on using memory modules
(Page 106)".
Order when installing multiple memory modules
If you insert several memory modules, insert them one after another in the following order.
• 1st memory module: DIMM 2-1 slot
• 2nd memory module: DIMM 1-1 slot
• 3rd memory module: DIMM 2-2 slot
• 4th memory module: DIMM 1-2 slot
The slots on the memory module are inscribed on the motherboard.
Procedure
1. Disconnect the device completely from the supply voltage. Be sure to follow the important
instructions under "Switching off the device (Page 66)"
2. Open the device. (Page 97)
3. If necessary, remove the bus frame (Page 98).
4. Open the two locks to the left and right of the slot.
5. Remove the memory module from its packaging.
Hold it by the upper edges only.
108
Operating Instructions, 09/2022, A5E52254141-AA
SIMATIC IPC647E