Operating The Device; Opening The Front Door; Multi-Monitoring - Siemens SIMATIC IPC RC-545A Operating Instructions Manual

Operating the device

6.1

Opening the front door

Procedure
1. Open the front door with the key.
2. Pull the front door to the side.
6.2

Multi-monitoring

In its delivery state, the device is equipped with integrated graphics interfaces.
You will find the various standard connection sockets on the rear of the device for connecting
monitors to these graphics interfaces.
You can find information on the position of the connection sockets and the labeling on the
device here: "Connections on the rear of the device (Page 24)".
To connect additional monitors to the device at the same time (multi-monitoring), you can
install a graphics card.
You can find information on this here:
• Connecting several monitors (multi-monitoring) (Page 67)
• Installing a graphics card (Page 88)
74
Client SIMATIC IPC RC-545A
Operating Instructions, 03/2024, A5E53092314-AA
6