To Resume; Setting The Distance Between Vehicles - Fiat 500e 2024 Owner's Manual

Table of Contents

Advertisement

will release. A cancel message will display on the
instrument cluster display and produce a warning
chime.
If the system keeps the car at a standstill for 2 minutes,
the electric parking brake will engage, and the system
will be deactivated.
NOTE:
The electric parking brake will be activated, and the
system will be deactivated when the car is close to
stopping speeds if the driver unbuckles the seat belt or
opens the door.
WARNING!
When the ACC system is resumed, the driver must
ensure that there are no pedestrians, vehicles or
objects in the path of the vehicle. Failure to follow
these warnings can result in a collision and death or
serious personal injury.
T
R
O
ESUME
If the system has been canceled by pressing the
brake pedal or the CANC (cancel) button, but have
not deactivated it by pressing the ACC button on the
steering wheel, the system can be recalled to the
previously set speed. To do this:
To Recall The Set Speed
Press the RES button on the steering wheel.
Remove foot from accelerator pedal.
The system will then be set to the last stored speed set
before canceling it.
Resume can be used at any speed above 0 mph (0
km/h) when ACC is active.
It is advisable to approach the previously set speed
gradually by bringing the current speed close to that
value. Then, press the RES button and release it to
engage the system at the desired speed.
WARNING!
The Resume function should only be used if traffic
and road conditions permit. Resuming a set speed
that is too high or too low for prevailing traffic and
road conditions could cause the vehicle to accelerate
or decelerate too sharply for safe operation. Failure
to follow these warnings can result in a collision and
death or serious personal injury.
S
T
D
B
ETTING
HE
ISTANCE
ETWEEN
The distance between your vehicle and the vehicle
ahead may be set to 1 bar (short), 2 bars (medium),
3 bars (long), 4 bars (maximum).
Distance Settings
1 — Longest Distance Setting (Four Bars)
2 — Medium Distance Setting (Two Bars)
3 — Long Distance Setting (Three Bars)
4 — Short Distance Setting (One Bar)
V
EHICLES
These distances are relative to the vehicle's speed.
The time interval in relation to the vehicle ahead
remains consistent, ranging from 1 second for the
short-distance 1-bar setting to 2 seconds for the
maximum-distance 4-bar setting. The selected distance
is shown on the instrument cluster display.
STARTING AND OPERATING
93
4

Advertisement

Table of Contents
loading

Table of Contents