Table of Contents
Advertisement
74
STARTING AND OPERATING
NOTE:
●
The system does not allow you to change the driving
mode when you drastically reduce the performance
of the electric motor.
●
When the motor is started, the system usually
maintains the driving mode that was active before
the vehicle was stopped.
The E-Mode Selector is located on the central console.
E-Mode Selector
The E-Mode Selector consists of the following operating
modes:
NORMAL Mode – In this mode the vehicle has no
performance limitations and can be driven fast using
all the power and torque of the traction system. In this
mode the energy consumption of the vehicle depends
on the driving style.
RANGE Mode – In this mode the vehicle continues
to have no speed restrictions but offers comfortable
handling with a smoother response to accelerator pedal
pressure. This mode helps to adopt a driving style
aimed at maximizing the range.
SHERPA Mode – In this mode the vehicle has
no acceleration restriction but the top speed is
electronically limited to 50 mph (80 km/h). This mode
significantly helps to adopt a driving style aimed at
maximum efficiency and maximizes the range of the
vehicle. The climate control system and seat heaters
are also automatically deactivated but can be manually
reactivated if necessary.
POWER STEERING
The electric power steering system will provide
increased vehicle response and ease of
maneuverability. The electric power steering system
adapts to different driving conditions.
WARNING!
Continued operation with reduced assist could pose
a safety risk to yourself and others. Service should be
obtained as soon as possible.
Alternate electric power steering efforts can be selected
through the Uconnect system. Refer to "Customer
Programmable Features" within "Uconnect Settings" in
"Multimedia" for further information.
If the Electric Power Steering warning icon is
displayed and the "Service Power Steering"
or the "Power Steering Assist Off – Service
System" message is displayed within the
instrument cluster display, this indicates the vehicle
needs to be taken to an authorized dealer for service.
Refer to "Warning Lights And Messages" in "Getting To
Know Your Instrument Panel" for further information.
If the Electric Power Steering warning icon is displayed
and the "Power Steering System Over Temp" message
is displayed on the instrument cluster display, this
indicates an over temperature condition in the power
steering system. Once driving conditions are safe, pull
over and let the vehicle idle for a few moments until the
icon and message turn off.
NOTE:
●
Even if the power steering assistance is no longer
operational, it is still possible to steer the vehicle.
Under these conditions there will be a substantial
increase in steering effort, especially at low speeds
and during parking maneuvers.
●
If the condition persists, see an authorized dealer for
service.
ACTIVE SPEED LIMITER
The Active Speed Limiter button is positioned on the
right side of the steering wheel.
Advertisement
Table of Contents
