Table of Contents
Advertisement
90
STARTING AND OPERATING
Windshield Camera
Precautions
When the sensor doesn't detect any vehicle ahead,
the system maintains a constant set speed. However,
when the sensor detects a vehicle in front, the system
intervenes automatically by slightly applying the brakes
or accelerating as needed to prevent exceeding the
preset speed. It aims to keep the preset distance and
adjust to the speed of the vehicle ahead.
It's advisable to deactivate the system in the following
situations:
●
When driving in fog, heavy rain, snow, or under
challenging driving conditions.
●
When navigating winding roads, icy, snowy, slippery
surfaces, or steep uphill or downhill slopes.
●
When entering a turn lane or an off-ramp on the
motorway.
●
When the circumstances don't permit safe driving at
a consistent speed.
A
/D
CTIVATION
EACTIVATION
Activation
To activate the device, press and release the Adaptive
Cruise Control (ACC) On/Off.
When the system is enabled and ready for operation, a
graphic indicating the "readiness" of the system and a
dedicated icon will appear on the display. The symbol
is grey with system enabled and turns white when the
system is activate (set speed).
Co-Driver with ACC
1 — Adaptive Cruise Control (ACC) On/Off Button
2 — Distance Setting Button
Deactivation
Press the ACC button to deactivate the system.
WARNING!
It is dangerous to leave the device on when it is not
used. There is a risk of inadvertently activating it and
losing control of the car due to unexpected excessive
speed.
S
T
D
S
ETTING
HE
ESIRED
PEED
You can set the desired speed when the vehicle is
stationary or in motion, within the range of 20 mph (30
km/h) up to 150 km/h (150 km.h).
To Set
When your car reaches the speed you want, press and
release either the button SET + or SET - to lock in the
speed. The display will indicate the set speed.
Remove your foot from the accelerator pedal.
If you press the accelerator pedal, the car will
accelerate faster than the set speed. During this time,
you'll see a dedicated message on the display for a
few seconds. The system won't control the distance
between your vehicle and the one in front, and the
speed will be determined solely by the position of the
accelerator pedal.
The system will return to normal operation as soon as
you release the accelerator pedal.
The system cannot be set in the following situations:
●
When the brake pedal is applied.
●
If the brakes are overheated.
●
When the electric parking brake is engaged.
Advertisement
Table of Contents
