Traffic Sign Recognition Warning Modes; Indications On The Display - Fiat 500e 2024 Owner's Manual

Table of Contents

Advertisement

In case of system fault or unavailability,
this indicator appears on the display.
If a Speed Limit Ends sign is recognized
and if the navigation system (if equipped)
is unable to provide a valid limit on the
stretch of road. The "No Speed Limit" indi-
cator will appear on the display.
T
S
R
W
RAFFIC
IGN
ECOGNITION
ARNING
M
ODES
TSR warning has three selectable modes of operation
that are available through the Uconnect system.
Visual
When Visual is selected, the system will alert the
driver when the current speed of the vehicle exceeds
the detected speed limit by showing a graphic in the
instrument cluster display.
Visual + Chime
When Visual + Chime is selected, the system will
alert the driver when the current speed of the vehicle
exceeds the detected speed limit by showing a graphic
in the instrument cluster display, and by sounding an
audible alert. The visual alert will remain on as long as
the vehicle is exceeding the speed limit.
NOTE:
Whenever an audible alert is requested by the TSR
system, the radio is also muted.
Off
When TSR warning is turned off, the system will show
any traffic signs, and no alerts will be issued to the
driver.
I
O
T
D
NDICATIONS
N
HE
ISPLAY
Detected traffic signs are shown in the instrument
cluster display, and can display any combination of
signs at one time (e.g. speed limit, speed limit and
supplemental info, and "Do Not Pass" signs) depending
on what information is available.
Traffic Signs Recognized
1 — Current Speed Limit Detected
2 — No Passing Zone Detected
3 — Current Speed Limit With Supplemental
Information (School Zone)
Supplemental Information
Supplemental information may be displayed along
with a newly detected speed limit, indicating special
circumstances of which the driver should be aware.
Available supplemental information includes:
STARTING AND OPERATING
School
Construction
Rain
Snow
Fog
Speed Limit Exceeded
When the vehicle speed exceeds the displayed speed
limit by 3 mph (5 km/h), the speed limit sign on the
instrument cluster display will show a red outline to
alert the driver.
CAUTION!
Traffic Sign Assist is designed to assist the driver
and is not a substitute for the driver. It is
always the driver's responsibility to continue to
monitor the speed limit and vehicle speed, and to
operate the vehicle in a manner safe for the road
conditions.
Functionality may be limited or the system may not
work if the sensor is obstructed.
The system may have limited operation or not
work at all in weather conditions such as heavy
rain, hail, and thick fog. Strong light contrasts can
influence the recognition capability of the sensor.
The area surrounding the sensor must not be
covered with stickers or any other object.
77
4
(Continued)

Advertisement

Table of Contents
loading

Table of Contents