Table of Contents
Advertisement
Supervisor level
Payment system lock
To avoid tampering, a programme lock
can be set up in programme operation.
If the lock is applied, the programme is
interrupted and payment credit is lost
as soon as the door is opened.
The time for the lock to be applied can
be adjusted to enable laundry to be ad-
ded.
- Factory default: off
- As soon as the programme starts
- 1–5 minutes after the start of the pro-
gramme
Delete paid signal
The "Paid" signal in coin box mode can
be applied until the end of the pro-
gramme or discarded if the programme
is not started after 5 minutes.
- Factory default: Off
- On
Debounce time
In coin mode, the debounce time for
the minimum payment signal that
must be applied can be adjusted.
- Factory setting: Short
For coin boxes where the falling coin
generates the paid pulse.
- Long
For central control units on a 230 V
basis.
Payment system overriding time
Setting the transition signal for the
coin box. Security time margin to pre-
vent the coin box being tampered with.
90
The transition time can be adjusted in
15-minute increments between 30–
240 minutes or switched off.
If the programme does not end within
the transition period, the setting in the
coin box is reset. The programme is can-
celled.
Factory default: 180 minutes
Advertisement
Table of Contents
