Table of Contents
Advertisement
Cleaning and care
Replacing the plinth filter
Filter wear caused by continuous
tumble dryer use.
If the tumble dryer is in continuous
use and is being cleaned regularly,
the plinth filter can begin to show
signs of wear after a while. This can
clog up the heat exchanger.
Replace the filter immediately if you
see the following signs of wear be-
fore or after cleaning (optional ac-
cessory).
Poor fit
The edges of the filter do not sit prop-
erly and the filter is deformed. Fluff will
blow into the heat exchanger unfiltered
through edges that do not sit properly.
This will cause a permanent obstruction
in the heat exchanger.
48
Deformation
Deformations indicate that the filter has
become blocked and worn by continu-
ous use.
Cracks, tears, indentations
Fluff will blow into the heat exchanger
through cracks and tears and will cause
obstruction.
Indentations indicate that the filter has
become blocked and worn by continu-
ous use.
Advertisement
Table of Contents
