Paradyne Comsphere 3830 User Manual page 29

COMSPHERE 3800 Series Modems – Model 3830
1. Use the AT&F&W command to load the appropriate
factory configuration to the appropriate storage area. Enter the
following:
TYPE:
Where: y is one of the following Factory configurations:
Where: n is one of the following storage areas:
These three configuration areas are nonvolatile
memory locations. Active (Saved) contains the
most recently saved changes to any
configuration options. In the event of power loss,
the modem retrieves these configuration options.
Customer 1 and Customer 2 are user-defined
configuration areas.
2. PRESS:
The selected factory configuration is saved.
When configuring your modem, keep a record of
its configuration options as a future reference in
case the modem must be replaced.
2-8
AT&Fy&Wn
0 for Async Dial
3 for UNIX Dial
5 for Cellular (Mobile)
6 for Cellular (PSTN)
and
0 for Active (Saved)
1 for Customer 1
2 for Customer 2
NOTE
Enter (Return)
NOTE
November 1996 3830-A2-GB91-20