S62
V.25 bis Coding
Identifies to the modem the type of coding used by the DTE while in V.25
bis mode.
Register has the following values:
0 = ASCII
1 = EBCDIC
Factory setting is ASCII.
S63
V.25 bis Idle Character
Identifies to the modem the type of idle fill used by the DTE while in V.25
bis mode.
Register has the following values:
0 = Mark
1 = Flag
Factory setting is Mark.
S64
V.25 bis New Line Character
Identifies to the modem the type of line terminator used by the DTE while
in V.25 bis mode.
Register has the following values:
0 = Carriage Return and Line Feed
1 = Carriage Return
2 = Line Feed
Factory setting is carriage return and line feed (CR + LF).
3830-A2-GB91-20
Table 4-3
(9 of 15)
Model 3830 S-Registers
November 1996
4. AT Command Set and S-Registers
4-37