Paradyne Comsphere 3830 User Manual page 71

COMSPHERE 3800 Series Modems – Model 3830
S52 DTE Local Loopback (CT141)
Determines if the modem performs a local analog loopback if it receives a
CT141 signal from the DTE.
Register has the following values:
0 = Disable
1 = Enable
Factory setting is Disable.
S55 Access from Remote
Determines whether the 3830 modem's configuration options can be
accessed by a remote 3800 Series modem via a dial-line or leased-line
connection.
0 = Enable
1 = Disable
Factory default is Enable.
S61 CT111 Rate Control
Determines if CT111 Rate is disabled, set for Fallback 1 or Fallback 2.
CT111 Rate allows the DTE to control modem rate via Pin 23 of the
EIA-232-D interface. This configuration option determines the effect of the
DTE Rate Control signal. It is only valid in Async Direct mode and
Synchronous mode. For proper operation, disable the V32 bis Autorate
(S76) and V32 bis Automode (S78) configuration options.
Register has the following values:
0 = Disable
1 = Fallback 1
2 = Fallback 2
Factory setting is Disable
4-36
Table 4-3
(8 of 15)
Model 3830 S-Registers
November 1996 3830-A2-GB91-20