Paradyne Comsphere 3830 User Manual page 76

S82 V.32 bis Autorate (Leased Line)
Determines if the Autorate function is used on leased lines when
connected in V.32 bis mode. Autorate allows the modem to adjust line
speed due to noise.
Register has the following values:
0 = Enable
1 = Disable
Factory setting is Enable.
S83 MI/MIC Dialing
Determines if MI/MIC control leads can be used to force the modem into
the originate handshake after first dialing a call.
Register has the following values:
0 = Disable
1 = Enable
Factory setting is Disable.
S84 AT Command Mode
Determines how the modem responds to valid and invalid AT commands.
The selections No ERROR and No Strap or ERROR permit installation
into applications that are customized for a different modem.
Register has the following values:
0 =Normal.
1 =No ERROR. The modem executes all valid commands, ignores invalid
commands, and never issues an ERROR message.
2 =No Strap or ERROR. The modem ignores all configuration
commands, but always issues an OK response message.
Factory setting is Normal.
3830-A2-GB91-20
Table 4-3
(13 of 15)
Model 3830 S-Registers
November 1996
4. AT Command Set and S-Registers
4-41