Paradyne Comsphere 3830 User Manual page 60

\K n Buffer Control, Send Break Control, Break Forces Escape
The \K n command sets three configuration options simultaneously:
BREAK BUFFER CONTROL
Determines if data stored in the modem's buffer is saved or discarded
when the DTE issues a break sequence.
SEND BREAK CONTROL
Determines what is sent from the modem first, data or break if a break
sequence is sent from the DTE.
BREAK FORCES ESCAPE
Determines whether or not the modem should enter Command mode
when it receives a break character from the DTE.
3830-A2-GB91-20
Table 4-2
(19 of 22)
Model 3830 AT Commands
Break
Buffer
Control
\K0 Discard Data
\K1 Discard Data
\K2 Keep Data
\K3 Keep Data
\K4 Keep Data
\K5 Keep Data
\K6 Discard Break
November 1996
4. AT Command Set and S-Registers
Send Break
Break Forces
Control Escape
Break First Enable
Break First Disable
Break First Enable
Break First Disable
Data First Enable
Data First Disable
Not Applic. Disable
4-25