Setting Add/Delete/Blank - Zenith HealthView H20E50DT Installation And Operating Manual, Warranty

Setting Add/Delete/Blank

Fine-tune the patient's channel selection list
1
Press the MENU key on the optional Installer's remote to
show the Setup menu on the screen.
2
Press SELECT repeatedly to highlight the Add/Del/Blnk
option.
3
Using either the NUMBER keypad and ENTER or the
Channel Up/Down arrows on the remote, select a channel.
(If adding a deleted channel, you will need to use the
number keypad and ENTER.)
4
Using the Right/Left ADJ arrow, choose whether the chan-
nel is Added, Deleted, or Blank.
5
To continue, select another channel and repeat Step 3.
When you are finished, press ENTER to remove menu.
Adding VCR 3, VCR 4, or FM to the Channel
Preview List
Go to the Setup menu, select the Add/Del/Blnk option.
Use Channel Up/Down to select the option and choose
Added.
Note: If the option was turned off in the Service menu,
you will have to reinstate it before it can appear as an
option in the Channel Preview list.
Note: You can elect to Add, Delete or Blank: VCR 3 and
VCR 4. FM can be Added or Deleted, but not Blanked.
If you delete a channel, it isn't gone for good. Just select it using
the NUMBER keypad on the remote, or add it later.
Mini glossary
ADD Adds new channels to the list that the patient can scroll through when using the remote.
DELETE Removes channels for one reason or another from the list that the patient can scroll through.
BLANK Removes the video signal from a channel so the patient will only receive the audio signal.
NOAUX3684
SETUP MENU
AUTO PROGRAM
ADD/DEL/BLNK
CH. LABELS
CLOCK SET
TIMER
CAPTIONS
LANGUAGE
POWER
1 2
3 4 5
7 8
0
ENTER
BED 2
BED 1
TIMER MENU
CH PREVIEW
SELECT
2
ADJ
4
CH 44 ADDED
3
3
6
9
3/5
BANK
1
ADJ
P A G E 1 5